Bottle cap lures are not a new concept they have been used in America and other countries for many years and have caught thousands of fish. These are now starting to make an appearance in the UK and the basic one is extremely easy to make and I hope you enjoy making your own.
Okay so the first thing you will need is bottle caps, you should be able to get a quantity of these for free by going into your local pubs and asking them if they will save you some bottle caps.
These ones in the photo were collected by my wife in a matter of twenty minutes from three different pubs, make sure you wash and dry the bottle caps to get rid of any liquid residue. Besides your bottle caps you will also need either a small screwdriver or a nine inch nail, a block of wood and a hammer.
Now that you have your bottle caps you will also need two split rings, a size 6 treble hook, two AAA shots and a size 8 swivel for each lure that you want to make.
Take one of your bottle caps and place it on the block of wood then place the screwdriver/nail on the edge of the bottle cap and hit the screwdriver/nail with the hammer to make a small hole.
Turn the bottle cap round so that the hole is in the twelve o’clock position and then repeat the process creating another hole in the six o’clock position. Slide a split ring through each hole and then holding the bottle cap at three and nine o’clock positions squeeze it until it starts to fold over.
Once the bottle cap is nearly folded over so that the two sides touch each other, stop and put two AAA shots inside now continue to squeeze closed until the shots can’t fall out when you let go. Finally slide the size 6 treble on to one split ring and the size 8 swivel on to the other and there you have your first basic bottle cap.
Well I hope you have enjoyed my blog and have found it interesting. Until next time tight lines and wet nets.